Shalan Steel, located in Kuala Lumpur, Malaysia, stands out as a top-notch manufacturer and supplier of premium Carbon Steel EN-351 Bars. These bars are crafted to adhere to the rigorous EN-351 standard, guaranteeing exceptional strength, durability, and reliability for a wide range of mechanical and engineering uses. With a strong focus on quality control throughout the production process, Shalan Steel ensures that each bar boasts precise dimensions, consistent performance, and a long service life. Their dedication to excellence makes Carbon Steel EN-351 Bars the go-to choice for industries like automotive, construction, and heavy machinery, providing cost-effective and trustworthy solutions for critical industrial and mechanical needs.
The Carbon Steel EN-351 Bars are primarily made from carbon steel, with carefully regulated levels of manganese, phosphorus, and sulfur to boost toughness, strength, and machinability. They showcase impressive mechanical properties, including high tensile strength, yield strength, hardness, and ductility, allowing them to handle heavy loads and mechanical stress with ease. Additionally, these bars offer good weldability and corrosion resistance, ensuring reliable performance and lasting durability even in tough industrial settings. The meticulous chemical composition and manufacturing process guarantee consistent quality across all applications.
| Grade | EN351 |
|---|---|
| Specification | BS970 1.0904 55Si7 55S6 55Si2Mn ASTM 9255 |
| Round bar size | Diameter: 3-~800mm |
| Hex Bar size | 2-100mm A/F |
| Flat bar size | Thickness: 2 -100mm |
| Width: 10 to 500mm | |
| Square bar size | 4 to 100mm |
| Angle bar size | 3mm*20mm*20mm~12mm*100mm*100mm |
| Section | 3.0 to 12.0mm thickness |
| Channel Bar | 80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness |
| Hollow Bar | 32mm OD x 16mm ID to 250mm OD x 200mm ID) |
| Billet Size | 1/2″ to 495mm Diameter |
| Rectangles Size | 33 x 30mm to 295 x 1066mm |
| Finish | Cold (bright) drawn, centreless ground,smooth turned, peeled, slit rolled edge, hot rolled, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black |
| Tolerance | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
| Surface | Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline |
| Condition | Hardened & tempered, annealed |
| Technique | EN45 Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod |
| Processing | Bar cutting to 650mm |
| Form | EN45 Welding Rod, Round, Rod, T-Bar, Channel Bar, Precision Ground Bar, Flat Bar, Square, Blocks, Round Rod, Rings, Hollow, Triangle, Rectangle, Hex (A/F), Threaded, Half Round Bar, Profiles, Billet, Ingot, I/H Bar, Forging etc. |
| Element | En42J |
| C | 0.75 – 0.90% |
| Mn | 0.50 – 0.90% |
| Si | 0/1 – 0.35 |
| S | 0.04% Max |
| P | 0.04% Max |
|
ULTIMATE TENSILE STRENGTH, S. (MPA) |
621 |
|---|---|
|
Modulus of elasticity, E (Gpa) |
204 |
|
Fatigue strength coefficient, of (Mpa) |
948 |
|
Fatigue strength exponent, b |
-0.092 |
|
Fatigue ductility coeffient ,ef |
0.26 |
|
Fatigue ductility exponent,c |
-0.445 |
We provide products that come with both mill test certificates and third-party test certificates, ensuring the highest standards of quality and compliance.
Type | SIZES (mm) | SIZES (Inches) | ISO Tolerance |
|---|---|---|---|
Cold Drawn and Polish | 3.00 – 75.00 | 1/8″ – 3.00″ | h8-h9-h10-h11 |
Cold Drawn and Ground | 10.00 – 75.00 | 5/6″ – 2.50″ | h8-h9-h10-h11 |
Peeled and Polished | 40.00 – 150.00 | 1.50″ – 6.00″ | h11, h11-DIN 1013 |
Peeled and Ground | 20.00 – 50.00 | 3/4″ – 2.00″ | h9-h10-h11 |
Cut to size on request (tolerance +2/-0 mm). Standard lengths of EN45 Bars 2000 mm up to 6000 mm available
5.0 | 45.0 |
6.0 | 50.0 |
7.0 | 55.0 |
8.0 | 60.0 |
9.0 | 65.0 |
10.0 | 70.0 |
12.0 | 75.0 |
16.0 | 80.0 |
20.0 | 90.0 |
25.0 | 100.0 |
30.0 | 130.0 |
35.0 | 160.0 |
40.0 | 200.0 |
These Carbon Steel EN-351 Bars find extensive use in creating automotive components, machine parts, shafts, studs, and fasteners. They are also ideal for structural and mechanical applications that demand high strength, wear resistance, and precise dimensions. Their ability to endure high stress, maintain durability, and deliver reliable performance makes them a favored choice among engineers, contractors, and industrial developers. Shalan Steel’s Carbon Steel EN-351 Bars offer dependable, cost-effective, and high-performance solutions for a variety of industrial and mechanical projects.
Shalan Steel is a leading manufacturer, supplier and exporter of high-quality Carbon Steel, Alloy Steel, Mild Steel and Galvanized Steel products. Our extensive product range includes Pipes, Tubes, Flanges, Pipe Fittings, Forged Fittings, Sheets and Plates, catering to various industries in Kuala lumpur, Malaysia.
Copyright 2025 Shalan Steel. All rights reserved
