Shalan Steel, a well-respected manufacturer and supplier located in Kuala Lumpur, Malaysia, specializes in high-quality SA 516 GR.60/70N NACE HIC Plates. These plates are specifically crafted for tough pressure vessel and boiler applications, especially in corrosive and sour service environments. They undergo a normalization process to enhance toughness and fully meet NACE MR0175 standards, providing outstanding resistance to hydrogen-induced cracking (HIC) and sulfide stress corrosion. With rigorous quality control in place, these plates ensure excellent weldability, durability, and consistent mechanical performance, making them a top choice for the oil, gas, petrochemical, and offshore industries where safety, reliability, and longevity are paramount.
The SA 516 GR.60/70N NACE HIC Plates are made with carefully controlled amounts of carbon, manganese, silicon, phosphorus, and sulfur, along with fine microalloying elements that boost strength and cracking resistance. The normalization process refines the grain structure, enhancing ductility and impact toughness. These plates boast high tensile strength, impressive notch toughness, and exceptional resistance to hydrogen blistering and stepwise cracking, ensuring reliable performance even in the harshest operating conditions.
| Grade | ASME SA 516 GR.60/70N Boiler and Pressure Vessel Steel Plates |
|---|---|
| Width | 1000mm-4500mm |
| Thickness | 5mm-150mm |
| Length | 3000mm-18000mm |
| Supply Condition | As Rolled, Normalized Rolling, Furnace Normalizing, Vacuum Degassing, Simulated Post-Weld Heat Treatment or as per customer requirement. |
| Impact tested | 52° C |
| Tempering | Notch toughness can be improved by quenched cooling from hot rolling or normalizing by the supplier. If such a faster cooling rate is agreed upon between purchaser and supplier then the steel is also to be tempered at 1200 F. |
| Applications | Used for weld fabrication of pressure vessels that require improved notch toughness for lower than ambient temperature service. |
| Process of Manufacturing | Hot-Rolled (HR) |
| C | Si | Mn | P | S | Al | Cr | Cu | Ni | Mo | Nb | Ti | V |
| 0.20 | 0.4 | 0.95/1.50 | 0.025 | 0.025 | 0.02 | 0.3 | 0.3 | 0.3 | 0.08 | 0.01 | 0.03 | 0.02 |
| 0.18 | 0.4 | 0.95/1.50 | 0.015 | 0.008 | 0.02 (Min) | 0.3 | 0.3 | 0.3 | 0.08 | 0.01 | 0.03 | 0.02 |
| Tensile strength | Yield strength | Elongation min, % 200 mm (8 in) | Elongation min, % 50 mm (2 in) |
| 415-550 MPa | 250 MPa | 21 | 25 |
| 485-620 (70-90) | 260 (38) | 17 | 21 |
We provide products that come with both mill test certificates and third-party test certificates, ensuring the highest standards of quality and compliance.
| British Standard | European Norm | ASTM/ASME | DIN |
| BS1501-161-430A | EN10028 P265GH | A/SA516 – Grade 60 | DIN 17155 HII |
| BS1501-224-490A/B | EN10028 P355GH | A/SA516 – Grade 70 | – |
Shalan Steel is a trusted manufacturer and supplier of high-quality SA 516 GR.60/70N NACE and HIC Plates in Kuala lumpur, Malaysia. We specialize in premium steel products, including Alloy Steel, Carbon Steel, Mild Steel and Galvanized Steel, with a strong focus on Carbon Steel Sheet and Plates. Our extensive inventory also includes Pipes, Tubes, Flanges, Forged Fittings and Bars. Committed to fast delivery and exceptional customer service, we use only the finest raw materials to ensure superior strength, durability and performance for critical industrial applications. Contact us today for all your SA 516 GR.60/70N NACE and HIC Plates needs!
You’ll find SA 516 GR.60/70N NACE HIC Plates widely used in the construction of pressure vessels, storage tanks, heat exchangers, and boilers for offshore platforms, refineries, and chemical processing plants. Their ability to maintain mechanical integrity while resisting HIC damage in sour gas and other aggressive environments significantly cuts down on maintenance downtime and operational risks. These plates offer a cost-effective and reliable solution for critical applications that require long-lasting durability and safety.
Shalan Steel is a leading manufacturer, supplier and exporter of high-quality Carbon Steel, Alloy Steel, Mild Steel and Galvanized Steel products. Our extensive product range includes Pipes, Tubes, Flanges, Pipe Fittings, Forged Fittings, Sheets and Plates, catering to various industries in Kuala lumpur, Malaysia.
Copyright 2025 Shalan Steel. All rights reserved
