Shalan Steel, a top-notch manufacturer and supplier based in Kuala Lumpur, Malaysia, specializes in high-quality HIC Resistant Steel Sheets and Plates. These products are specifically designed to tackle the harsh effects of hydrogen-induced cracking in sour service environments. With a focus on advanced metallurgy and rigorous quality controls, Shalan Steel ensures that their steel offerings provide exceptional toughness, corrosion resistance, and structural integrity, even in challenging conditions involving wet hydrogen sulfide (H2S). Thanks to their expertise and efficient delivery system, Shalan Steel has become a go-to choice for industries like oil and gas, petrochemical, and pressure vessel manufacturing throughout Malaysia and beyond, guaranteeing reliable performance in demanding industrial settings.
Typically, HIC Resistant Steel Sheets and Plates have a low carbon content of around 0.10–0.14%, along with carefully controlled levels of manganese (0.8–1.2%), silicon (0.3–0.4%), phosphorus (max 0.012%), sulfur (max 0.002%), copper (0.2–0.35%), nickel (0.15–0.25%), aluminum (0.02–0.05%), niobium (0.015–0.03%), and molybdenum (0.06–0.09%). These plates are engineered with mechanical properties that cater to sour service, boasting high impact toughness (CVN energy ≥ 75 ft-lb at -20°F), impressive yield strengths around 400–500 MPa, and proven resistance to hydrogen-induced cracking, as indicated by low crack sensitivity ratios in line with NACE standards.
| Material | ASTM A516 |
| Grade | SA516 Gr 65, SA516 Gr 70 ,SA516 Gr 60 , Gr 60N |
| Size |
|
| Manufacturing Process | Â Hot-Rolled |
| Impact tested | -52° C |
Technical requirements | high strength and high toughness requirements, Detection, Z15 – Z35 thickness direction performance requirements, etc |
| Condition of Supply | Heat Treatment Simulated Post-Weld , Furnace Normalizing, As Rolled, Normalized Rolling, Vacuum Degassing or as per need |
| Base Plate | hot dipped zinc coated and  A-Z coated steel sheet, Cold rolled steel sheet |
Â
| C | ≤0.2 |
| Mn | 0.85–1.20 |
| Cu | ≤0.2 |
| Cev | ≤0.41 |
| S | ≤0.001 |
| Si | 0.15–0.40 |
| P | ≤0.010 |
| Mo | ≤0.1 |
| Ni | ≤0.4 |
| Cr | ≤0.3 |
| ASTM/ASME | DIN | European Norm | British Standard |
| A/SA516 – Grade 60 | DIN 17155 HII | EN10028 P265GH | BS1501-161-430A |
We provide products that come with both mill test certificates and third-party test certificates, ensuring the highest standards of quality and compliance.
| Grade | Plates Thickness |
|---|---|
| A516 60 | ≤12.5mm |
| A516 60 | ≥100 and ≤200mm |
| A516 60 | ≥12.5 mm and ≤50mm |
| A516 60 | >200mm |
| A516 65 Dicrest only | ≥100 mm and ≤200mm |
| A516 60 | ≥50 mm and ≤100mm |
| A516 65 Dicrest only | ≤12.5mm |
| A516 65 Dicrest only | ≥12.5 mm and ≤50mm |
| A516 65 Dicrest only | ≥50 mm and ≤100 mm |
| A516 70 | >200 mm |
| A516 65 Dicrest only | >200mm |
| A516 70 | ≥100 mm and ≤200mm |
| A516 70 | ≤12.5mm |
| A516 70 | ≥50 mm and ≤100mm |
| A516 70 | ≥12.5 mm and ≤50mm |
| Lengths in mm | Plates Thickness in Inches | Widths in mm | Lbs/Sft |
|---|---|---|---|
| 240 | 7/16 Inches | 96 | 17.870 Lbs/Sft |
| 96, 120, 240 | 5/16 Inches | 60 ,48 , 84 , 72 ,96 | 12.760 Lbs/Sft |
| 96, 120, 124,133, 144, 156, 240 | 3/16 Inches | 7.660 Lbs/Sft | |
| 110, 96, 120, 240, 144 | 1/4 Inches | 10.210 Lbs/Sft | |
| 120, 96, 144, 169, 240, 260 | 3/8 Inches | 15.320 Lbs/Sft | |
| 120, 96, 144, 240 | 1/2 Inches | 20.420 Lbs/Sft | |
| 240 | 1 1/8 Inches | 96 | 45.950 Lbs/Sft |
| 96, 240, 120, 480 | 1 Inches | 48, 72, 96 | 40.840 Lbs/Sft |
| 96, 240, 120, 480 | 3/4 Inches | 48 , 72 , 84, 96 | 30.630 Lbs/Sft |
| 240 | 7/8 Inches | 96 | 35.740 Lbs/Sft |
| 240, 120, 480 | 5/8 Inches | 48 , 96 | 25.530 Lbs/Sft |
| 96, 120, 240 | 1 1/4 Inches | 48, 96 | 51.050 Lbs/Sft |
| 120, 240 | 1 1/2 Inches | 96 | 61.260 Lbs/Sft |
| 240 | 1 3/4 Inches | 71.470 Lbs/Sft | |
| 240 | 1 3/8 Inches | 56.160 Lbs/Sft | |
| 120, 240 | 2 Inches | 81.680 Lbs/Sft | |
| 240 | 2 1/2 Inches | 102.100 Lbs/Sft | |
| 1 5/8 Inches | 66.370 Lbs/Sft | ||
| 2 3/4 Inches | 112.310 Lbs/Sft | ||
| 2 1/4 Inches | 91.890 Lbs/Sft | ||
| 3 Inches | 122.520 Lbs/Sft | ||
| 120 | 3 1/2 Inches | 142.940 Lbs/Sft | |
| 120 | 6 Inches | 245.040 Lbs/Sft | |
| 120 | 3 3/4 Inches | 153.150 Lbs/Sft | |
| 144 | 3 1/4 Inches | 132.730 Lbs/Sft | |
| 144, 180 | 4 Inches | 163.360 Lbs/Sft | |
| 120 | 4 1/2 Inches | 183.780 Lbs/Sft | |
| 120 | 4 1/4 Inches | 173.570 Lbs/Sft | |
| 144 | 5 Inches | 204.200 Lbs/Sft | |
| 160 | 7 Inches | 285.880 Lbs/Sft |
The HIC Resistant Steel Sheets and Plates from Shalan Steel are extensively utilized in the construction of pressure vessels, pipelines, and storage tanks that encounter sour gas and wet H2S environments, which are prevalent in the oil and gas sector. Their outstanding resistance to hydrogen-induced cracking and corrosion is vital for ensuring structural integrity and safety in sour service applications. Moreover, these steels are also well-suited for petrochemical plants, refineries, and other heavy industrial equipment where long-lasting durability in aggressive chemical environments is essential. Their unique blend of strength, toughness, and chemical resistance meets the rigorous demands of critical industrial applications.
Shalan Steel is a leading manufacturer, supplier and exporter of high-quality Carbon Steel, Alloy Steel, Mild Steel and Galvanized Steel products. Our extensive product range includes Pipes, Tubes, Flanges, Pipe Fittings, Forged Fittings, Sheets and Plates, catering to various industries in Kuala lumpur, Malaysia.
Copyright 2025 Shalan Steel. All rights reserved
